
Diisopropyl Succinate
Zouping Jinxing Chemical Co., Ltd. is one of the leading manufacturers and suppliers of diisopropyl succinate in China. If you're going to wholesale bulk diisopropyl succinate made in China, welcome to get free sample from our factory. All customized products are with high quality and low price.
Basic physical properties
CAS: 141-60-6 (Commonly known as diisopropyl succinate)
Appearance: Colorless, transparent liquid at room temperature (may become slightly cloudy at low temperatures but does not crystallize like the dimethyl ester)
Boiling point: Approx. 208–210°C (atmospheric pressure), 120–125°C / 1.3 kPa
Melting point: <–20°C (does not crystallize; facilitates low-temperature handling)
Density: 1.020–1.030 g/cm³ (20°C); lighter than the dimethyl ester (1.12) but still heavier than monoesters
Refractive index: n²⁰ᴅ ≈ 1.420
Solubility: Insoluble in water (<0.1 g/100 mL); miscible with ethanol, diethyl ether, acetone, ethyl acetate, toluene, and hydrocarbons; exhibits good solvency for nitrocellulose and acrylic resins
Flash point: Approx. 96°C (closed cup); combustible liquid (Category 4); superior safety profile compared to the vast majority of monoesters
Vapor pressure: Extremely low at 20°C (<0.05 kPa); virtually non-volatile
Primary Uses
High-boiling inert solvent/plasticizer precursor: For coatings, electronic adhesives, and specialty inks; characterized by low volatility and low migration.
Organic synthesis intermediate: Precursor for succinic acid-based pharmaceuticals (e.g., succinate derivatives), pesticides, and fragrances.
Bio-based route: Produced via the esterification of fermentation-derived succinic acid with acetone (or isopropanol); classified as a "bio-based diester."
Chromatographic standard and analytical reference material.
Safety and Physiology
Toxicity:Diisopropyl Succinate is low toxicity. Oral LD₅₀ in rats ≈ 3.0–4.0 g/kg (estimated value; no data indicating high toxicity); mildly irritating to skin and mucous membranes; non-accumulative.
Ecology: Biodegradable; low aquatic toxicity.
Storage and Transport: Store in a cool, dry place; avoid exposure to strong acids, strong bases, and heat (to prevent isopropyl elimination); Class 3, PG III, or managed as a combustible liquid.
Frequently Asked Questions
Q: What is Diisopropyl Succinate mainly used for?
A: Applied as chemical intermediate and solvent.
Q: How should this product be stored?
A: Seal tightly, store in cool ventilated warehouse.
Q: What documents can you provide with shipment?
A: Batch COA and SDS are supplied.
Hot Tags: diisopropyl succinate, China diisopropyl succinate manufacturers, suppliers, factories, butyl acetate esterification, Industrial Grade High solubility 95 Ethanol, Industrial Grade Low Toxicity Sec butyl Acetate, Low toxicity Environmentally Friendly Xylene, Low VOC Environmental friendly Methyl Acetate, Strongly Polar And Highly Soluble DMF
Previous
Diethyl SuccinateYou Might Also Like
Send Inquiry










