ABS-M347

ABS M347 is an injection molding grade resin characterized by high gloss, high rigidity, and medium impact resistance. As a typical general-purpose engineering plastic raw material, it is primarily used in smart home appliances, 3C electronics, and automotive components.

Send Inquiry

Product Introduction

Zouping Jinxing Chemical Co., Ltd. is one of the leading manufacturers and suppliers of ABS-M347 in China. If you're going to wholesale bulk ABS-M347 made in China, welcome to get free sample from our factory. All customized products are with high quality and low price.

Typical application areas of ABS-M347

Home Appliances: Front and rear covers for televisions, air conditioner panels, washing machine control panels, and casings for small and medium-sized appliances such as air fryers and vacuum cleaners.

Automotive Interiors: Instrument panel covers, air conditioning vents, glove box panels, and small interior trim strips.

3C and Consumer Products: Casings for printers and copiers, routers and set-top boxes, and casings for children's toys and stationery bags.

Core physical property parameters

Flow and Density: ABS-M347 melt flow rate approximately 3–12 g/10 min (220℃/10 kg), density approximately 1.04–1.05 g/cm³, molding shrinkage 0.4%–0.7%.

Mechanical Properties: Tensile strength approximately 43–50 MPa, flexural modulus approximately 2400 MPa, cantilever beam notched impact strength (23℃) approximately 200–220 J/m, exhibiting moderate impact resistance.

Thermal Properties: Heat distortion temperature (1.8 MPa) approximately 81–87℃, Vicat softening point approximately 100–103℃, flame retardant rating typically HB.