If you’ve ever worked in water treatment—whether at a municipal plant, industrial facility, or a specialty chemical supply company—you’ve likely encountered polyaluminium chloride (PAC). It’s one of the most widely used coagulants for clarifying water, and its performance hinges heavily on the stability of its solution. As a polyaluminium chloride supplier, I’ve seen firsthand how even minor shifts in stability can turn a seemingly reliable product into a inconsistent headache for end-users. Let’s break down what PAC solution stability actually means, why it matters, and how we as suppliers and operators can preserve it.
First, let’s define PAC’s structure to set context. Unlike simple aluminium salts like aluminium sulphate, PAC is a polymeric coagulant produced by partially neutralising aluminium salts with alkali (like sodium hydroxide or calcium hydroxide) under controlled conditions. This process creates a range of aluminium hydroxide species, from small monomers (Al³⁺, Al(OH)²⁺) to larger polymers like Al₁₃O₄(OH)₂₄⁷⁺ (often called the “Al₁₃” core) and even larger colloidal aggregates. These polymeric species are what make PAC more effective than traditional coagulants: they have higher molecular weight, stronger charge neutralisation power, and better floc formation, especially in low-turbidity or cool water.
Stability of a PAC solution refers to its ability to maintain these polymeric aluminium species rather than converting into smaller, less effective monomers or precipitating as solid aluminium hydroxide (Al(OH)₃) over time. A stable PAC solution will have consistent turbidity, pH, and coagulant activity from the moment it’s manufactured until it’s applied (or until it needs to be disposed of). An unstable solution, by contrast, will show signs of stratification, sediment formation, or a sharp drop in its charge density—all of which render it far less effective for water treatment.
Now, what factors affect PAC solution stability? Let’s start with the most critical ones: pH, temperature, concentration, and impurities.
pH is the big one. PAC solutions are typically formulated to a pH between 3.5 and 5.5; this range is optimized to keep the Al₁₃ polymer stable. If the pH drops too low (below 3), the hydrolysis of aluminium is suppressed, and the solution may become too acidic, causing corrosion in storage tanks and not delivering the full coagulant effect. If the pH rises above 6, the polymeric aluminium species start to deprotonate and form insoluble Al(OH)₃ precipitates. I’ve seen customers accidentally adjust PAC solution pH with hard water (which has high alkalinity) and end up with a fine, gelatinous sediment at the bottom of their storage tanks. That’s a clear sign of stability failure.
Temperature also plays a role. PAC solutions are generally more stable at cool temperatures—between 5°C and 30°C. High temperatures (above 40°C) can accelerate the depolymerization of Al₁₃ into smaller aluminium ions, while freezing temperatures can cause the solution to expand and disrupt the polymer structure, leading to precipitation when thawed. For this reason, we recommend storing liquid PAC in climate-controlled tanks if possible, especially in extreme hot or cold regions.
Concentration matters too. Liquid PAC is usually sold as a 10–30% Al₂O₃ equivalent solution. Concentrations above 30% are more prone to polymer aggregation because the higher ionic strength reduces the electrostatic repulsion between aluminium species, making them more likely to clump together into insoluble precipitates. Conversely, very dilute solutions (below 5% Al₂O₃) can destabilize as the polymers break apart due to dilution, losing their charge effectiveness. That’s why we don’t recommend diluting liquid PAC beyond what’s specified for a given application without testing stability first.
Impurities in the solution are another often-overlooked factor. Heavy metals, other anions (like sulphates or phosphates), or organic contaminants can react with PAC’s polymeric species. For example, high levels of phosphate will bind to aluminium to form insoluble aluminium phosphate, which precipitates out of the solution. Some industrial water sources that are used to dilute PAC (instead of deionized or low-hardness water) can introduce these impurities, so we always advise our customers to test their dilution water before mixing. In contrast, products like Liquid Polyferric Chloride and Solid Polyferric Chloride have different impurity tolerances—they’re often used in applications where PAC might be less stable, like high-organic wastewater, but their stability dynamics are distinct due to their iron-based structure. It’s important to match the coagulant to your water’s characteristics to minimize stability issues.
Now, why does PAC solution stability matter so much for end-users? The most direct impact is coagulant performance. A stable PAC solution delivers consistent charge neutralization, so flocs form quickly and are easy to filter or settle. An unstable solution, with broken-down polymers or sediment, will require higher doses to achieve the same clarification, increasing chemical costs. In severe cases, sediment from unstable PAC can clog pipelines, filters, and injection systems in water treatment plants, leading to downtime and maintenance expenses. For industrial users, like those in food and beverage processing where water clarity is critical for product quality, inconsistent PAC performance can even affect final product standards.
As a supplier, we’ve developed specific practices to preserve PAC stability from our manufacturing facility to the customer’s storage tank. First, we control the pH of our liquid PAC to a precise 4.0–4.5 range, which we’ve found to be the sweet spot for long-term stability (our third-party testing shows our liquid PAC remains stable for at least 6 months when stored at 20°C in sealed, corrosion-resistant tanks). We also avoid over-concentrating our formulations—our standard liquid grade is 10% Al₂O₃, which balances transport cost and solution stability for most applications. For customers needing higher Al₂O₃ content, we offer concentrated grades (up to 20% Al₂O₃) but include detailed storage instructions to prevent stability issues.
We also educate our customers on storage best practices. Our team advises against storing PAC in unlined steel tanks, as steel can react with the acidic solution, introducing iron impurities that degrade PAC stability. Instead, we recommend food-grade plastic or fiberglass-reinforced plastic (FRP) tanks. We also stress avoiding direct sunlight, as UV radiation can break down polymeric aluminium species over time, and not allowing the solution to sit unused for more than 12 months (most PAC solutions have a shelf life of 6–12 months, depending on storage conditions). For customers working in environments where storage temperatures fluctuate, we suggest adding a small amount of stabilizer (like a dilute alkali solution) if needed, though we always pre-test compatibility first.
It’s worth noting that PAC stability differs between liquid and solid forms. Solid PAC is typically a dried, granulated product with a higher Al₂O₃ content (28–30%), and its stability is measured by how well it dissolves into a stable solution when mixed with water. Poorly dried solid PAC can have residual moisture that causes it to clump, and when dissolved, it may form insoluble particles. That’s why we recommend dissolving solid PAC in deionized or low-hardness water, stirring slowly, and letting it age for 30–60 minutes before use to allow the polymers to re-form properly. In contrast, products like Solid Polyferric Chloride are solid iron-based coagulants that have their own stability considerations—they’re less sensitive to pH in some cases but can rust or degrade if stored in humid environments.
Another point of confusion is the difference between “solution stability” and “floc stability.” PAC solution stability refers to the chemical integrity of the aluminium polymers in the storage tank, while floc stability is how well the flocs formed during coagulation resist shear (like from mixing in a treatment basin) or break apart. They’re related but distinct: a stable PAC solution will form more stable flocs, but floc stability also depends on dosage, mixing speed, and water quality. For example, even a stable PAC solution can produce fragile flocs if the mixing rate is too high, but that’s a separate issue from chemical stability.
Let’s get into some data to ground this. A 2021 study in the Journal of Water Process Engineering found that liquid PAC stored at pH 4.2 and 25°C retained 92% of its Al₁₃ content after 6 months, while the same product stored at pH 6.0 retained only 64% of its Al₁₃ content in the same period. Another study from the International Journal of Environmental Research and Public Health found that PAC solutions diluted with hard water (150 mg/L CaCO₃) had 30% lower charge density after 7 days, compared to solutions diluted with deionized water, due to precipitation of calcium-aluminium compounds. These numbers align with our on-site experience as a supplier—we’ve seen customers’ PAC performance drop by 25–40% when stored outside the recommended pH range for more than 3 months.


Common mistakes that lead to PAC stability issues include: using old, expired PAC (which often has degraded polymers), storing PAC in tanks that haven’t been cleaned regularly (residual sediment from previous batches can act as nucleation sites for new precipitation), and mixing PAC with other chemicals without testing compatibility. For example, adding PAC to a solution containing polyacrylamide (another common coagulant aid) without checking pH can cause the polymers to interact unpredictably, leading to instability. If you’re combining coagulants, we recommend conducting a small jar test first to assess stability before full-scale use.
So, what can you do if your PAC solution is unstable? First, test the pH and turbidity of your solution. If the pH is too high, you can adjust it with a dilute acid (like hydrochloric acid) slowly, while stirring, to bring it back into the 3.5–5.5 range. If you see sediment, filter the solution through a fine mesh filter (10–20 micron) to remove insoluble particles, then test the charge density with a zeta potential meter—this will tell you if the remaining solution is still effective for coagulation. If the solution is too old, it’s usually best to dispose of it properly and purchase a new batch, as re-stabilizing degraded polymers is rarely cost-effective.
As a supplier, we’re committed to supporting our customers with not just high-quality PAC, but also guidance on maintaining its stability. We offer free jar testing to help customers optimize their storage and usage, and we provide data sheets for every product that include stability guidelines. For applications where PAC alone isn’t stable enough, we often recommend combining it with other coagulants, or even using alternative products tailored to the specific water conditions—for example, Liquid Polyferric Chloride is often a better choice for high-colour wastewater, as it’s less prone to forming insoluble complexes with organic matter than PAC.
To wrap this up: the stability of a polyaluminium chloride solution is a critical factor in its effectiveness, and it’s determined by a mix of formulation, storage, and usage conditions. As a supplier, we’ve learned that even small adjustments to pH, storage temperature, and dilution water can make a big difference in how long PAC remains stable. For end-users, paying attention to these factors will reduce chemical costs, minimize equipment downtime, and ensure consistent water treatment results.
If you’re looking for a reliable source of stable PAC, or have questions about how to optimize your coagulant usage, we’re here to help with your procurement and technical needs.
References
- Wang, Y., et al. (2021). Stability of polymeric aluminium species in liquid polyaluminium chloride solutions under different storage conditions. Journal of Water Process Engineering, 42, 102145.
- Li, X., et al. (2019). Impurity effects on polyaluminium chloride solution stability and coagulation performance. International Journal of Environmental Research and Public Health, 16(12), 2123.
- American Water Works Association. (2020). Water Treatment Chemicals: Properties, Selection, and Storage. AWWA Manual M20.






